I'm having a hard time getting the programming finished on a fort4 evo all on a 2012 f150. Im doing it as a standalone remote start and have 2 keys. I've used the flashlink and made sure its flashed for the truck and standalone. When i go to program initially i hold the program button then plug in the power cord and let off at the blue/red light. I then plug everything else in and start the key process with 2 master keys, it wont ever get to the flashing blue/red 10x doing it that way and the truck will stay powered on even after i remove the key. If i keep the red plug unplugged and try the programming i can get the red/blue to flash 10x but it never goes to the last step of flashing the can bus. I try to plug in the red plug after the 10x flash and it goes back to truck will stay powered on with no key in the ignition. Any ideas?